The Channel type side rails and Rungs of Channel or Square tube are specially designed for wider width for Electrical Cable Lines
We offer the most extensive range of Ladder Type Cable Trays. With Sizes ranging from 150mm Width to 1200mm Width, in various thicknesses and Flange heights depending on the load requirements. Some of our standard Ladder Cable Trays are as listed in the table below:
RANGE
|
Product Code |
Width |
Side Runner Ht. |
Load Bearing UDL |
Material |
|
AM-LT 100 |
100 mm |
75 / 100 / 150 |
30 kg./ mtr |
Polyester / Vinyl |
|
AM-LT 150 |
150 mm |
75 / 100 / 150 |
30 kg./ mtr |
Polyester / Vinyl |
|
AM-LT 200 |
200 mm |
75 / 100 / 150 |
30 kg./ mtr |
Polyester / Vinyl |
|
AM-LT 250 |
250 mm |
75 / 100 / 150 |
30 kg./ mtr |
Polyester / Vinyl |
|
AM-LT 300 |
300 mm |
75 / 100 / 150 |
45 kg./ mtr |
Polyester / Vinyl |
|
AM-LT 400 |
400 mm |
75 / 100 / 150 |
45 kg./ mtr |
Polyester / Vinyl |
|
AM-LT 450 |
450 mm |
75 / 100 / 150 |
45 kg./ mtr |
Polyester / Vinyl |
|
AM-LT 500 |
500 mm |
75 / 100 / 150 |
45 kg./ mtr |
Polyester / Vinyl |
|
AM-LT 600 |
600 mm |
75 / 100 / 150 |
60 kg./ mtr |
Polyester / Vinyl |
|
AM-LT 750 |
750 mm |
75 / 100 / 150 |
75 kg./ mtr |
Polyester / Vinyl |
|
AM-LT 900 |
900 mm |
75 / 100 / 150 |
90 kg./ mtr |
Polyester / Vinyl |
Accesories For Ladder Type Cable Trays
|
Pultered Fittings |
|||
|
90° Horizontal Radius Bend |
30°, 45°, 60° Horizontal Direct Bend |
45° Horizontal Radius Bend |
Horizontal Adjustable Bend 45° Thru 135° |
|
Joining 45° Horizontal Radius Bend |
30° / 45° Direct Inside Vertical Bend |
30° / 45° Direct Outside Vertical Bend |
90° Horizontal Direct Bend |
|
30° / 45° Inside Vertical Radius Bend |
30° / 45° Outside Vertical Radius Bend |
90° Inside Vertical Radius Bend |
90° Outside Vertical Radius Bend |
|
Straight Reducer |
Right or Left Hand Reducer |
Horizontal Radius Tee |
Horizontal Radius Cross |
|
MOLDED FITTINGS |
||||||
|
90° Vertical Molded Radius Bend |
90° Horizontal Molded Radius Bend |
45° Horizontal Molded Radius Bend |
Joining 45° IV & 45° OV molded |
45° Outside Vertical Molded Radius Bend |
45° Inside Vertical Molded Radius Bend |
Joining 45° IV & 45° OV molded |
|
30° Outside Vertical Molded Radius Bend |
30° Inside Vertical Molded Radius Bend |
Joining 30° IV & 30° OV molded |
Outside Vertical Adjustable Molded Radius Bend |
Inside Vertical Adjustable Molded Radius Bend |
Horizontal Molded Radius Tee |
Horizontal Molded Radius Cross |
|
90° Vertical Molded Radius Tee |
||||||
Syndicate
